Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

FAQ

Straight answers for buyers and engineers

What we make, how big, in which alloys, how we test it and how to order.

About us

What does H.J. MetalCraft make?

H. J. MetalCraft Pvt. Ltd. is a steel foundry that makes carbon steel, alloy steel, heat-resistant steel (HRCS), stainless steel, duplex steel and nickel-base alloy castings up to 180 kg per piece, supplied raw or machined to customer drawings.

Where is H.J. MetalCraft located?

Our foundry and head office are at D-15/16 Bharat Small Ind. Estate, Vatva Station Road, Vatva, Ahmedabad 382440, Gujarat, India. We also have offices at Spaces, 35 New Broad St, London EC2M 1NH, and 17 Clausen Rd, Edison, NJ 08817, USA.

How long has H.J. MetalCraft been in business?

The foundry was established in 2006. Our parent company, Patterncraft Enterprise, has made pattern equipment since 1985.

Which industries do you serve?

Valves and pumps, oil and gas, chemical, marine, cement, power generation, earth-moving equipment, automobile and general engineering. See our industries pages for each.

Capabilities

What is the maximum weight of casting you can make?

Up to 180 kg per piece for sand castings. Our investment casting unit makes parts from 10 g to 50 kg.

What is your minimum wall thickness?

7 mm.

Which materials do you cast?

Ferrous castings in carbon steel, alloy steel, heat-resistant steel (HRCS), stainless steel, duplex and super duplex steel, high-chrome and Ni-hard irons (ASTM A532), manganese steel (ASTM A128), and grey and SG iron (ASTM A48, A536); and non-ferrous castings in nickel-base alloys such as Inconel 625, Incoloy 825 and Monel, with chemistry checked on our CCD spectrometer for 24 nickel-base elements.

Which standards do you work to?

ASTM, DIN, EN, BS and IS, as well as proprietary customer specifications.

Which moulding processes do you use?

CO2 and airset (no-bake) sand processes, for both moulds and cores, with in-house sand reclamation.

Do you make your own patterns?

Yes. Our pattern shop makes patterns in teak wood, aluminium and CI using German CNC routers, run by our parent company Patterncraft Enterprise.

Do you heat-treat castings?

Yes. We have gas-fired bogie furnaces for water quenching, normalising, annealing and tempering, and a 14,000-litre agitated quench tank.

Do you machine castings?

Yes. In-house on four VMCs (up to 1,300 × 700 × 700 mm, two with a 4th axis), three CNC turning centres (up to Ø600 × 1,050 mm) and conventional machines, and through our network of machining partners.

Can castings be painted or coated?

Yes. We supply castings painted or with corrosion-resistant and autophoretic coatings.

Do you make investment castings?

Yes. Our Unit II makes investment (lost-wax) castings from 10 g to 50 kg, alongside sand castings up to 180 kg. See our investment casting page.

What is your production capacity?

200 tonnes a year in 2026, expanding to 360 tonnes in 2027 and 600 tonnes by 2028.

Can you clad or overlay-weld castings?

Yes. Our automatic overlay welding machine with cold-wire feeder deposits cladding 10–15 mm thick on flanges from Ø200 to 550 mm. Cladding is typically used on flange faces, valve bores and sealing faces exposed to corrosion or wear; the overlay alloy is set by your specification.

Should I choose sand casting or investment casting?

Sand casting suits larger and heavier parts (up to 180 kg with us) and low to medium quantities. Investment casting suits small, detailed parts from 10 g to 50 kg made in repeat batches, where a fine surface and a near-final shape save machining. Note that our PED certificate covers sand castings only.

Quality & testing

How do you check chemical composition?

With a PMT spectrometer (Fe-base, up to 17 elements) and a CCD spectrometer (32 elements for ferrous alloys, including nitrogen, and 24 for nickel-base alloys).

What mechanical testing do you carry out?

Tensile testing on a 200 kN electronic universal testing machine, 0.1% and 0.2% proof stress and Young's modulus with an extensometer, and computerised Brinell hardness testing.

What NDT methods are available?

Ultrasonic (UT), radiographic (RT), magnetic particle (MT) and dye penetrant (PT) testing.

Who carries out NDT?

Two Level II engineers qualified for all NDT methods and an ASNT-certified Level III.

Do you use external laboratories?

Our in-house testing is backed by NABL-accredited laboratories, and we welcome customer evaluations and assessments.

Are you ISO 9001 certified?

Yes. Our quality management system is certified to ISO 9001:2015 by TÜV India Pvt. Ltd. (TÜV NORD Group) for the manufacture and supply of sand castings and precision machined components.

Are you PED certified?

Yes. TÜV NORD Systems (Notified Body 0045) has certified our quality management system for material manufacturers under PED 2014/68/EU, Annex I 4.3 (certificate 0045/202/WZ/22270/24), covering ferritic, alloyed, austenitic and duplex steel sand castings up to 180 kg and 65 mm thick.

Who are your customers?

Valve, pump, oil and gas, chemical, marine, cement, power, earth-moving and general engineering companies. Cameron, USA (now part of SLB) has been one of our major customers since the beginning.

What is a 3.1 material certificate under PED?

An EN 10204 type 3.1 inspection certificate reports the actual test results for the delivered product (heat number, chemistry, mechanical properties, heat treatment and any specified tests), validated by the manufacturer's inspection representative, who is independent of manufacturing. Under PED Annex I 4.3, certificates issued by a material manufacturer with a specifically assessed, certified QMS, as ours is, are presumed to show conformity.

Does your PED certificate cover investment castings?

No. It covers sand castings in ferritic, alloyed, austenitic and duplex steels up to 180 kg and 65 mm thick. Investment castings and cast irons are outside its scope.

Is Cameron (SLB) a customer?

Yes. Cameron, USA, now part of SLB, has been one of our major customers since the beginning.

Do you hold ZED certification?

Yes. India's Ministry of Micro, Small & Medium Enterprises awarded us ZED Bronze under the MSME Sustainable (ZED, Zero Defect Zero Effect) Certification Scheme on 6 July 2026, valid for three years.

Ordering & export

How do I get a quotation?

Use the quote form on our contact page and attach your drawing, or email [email protected], copying [email protected]. Include material grade, weight, quantity, supply condition and testing requirements.

Do you export?

Yes. We have exported since 2006, to customers in the USA, Canada, Mexico, Ireland, the Netherlands, Denmark, France, Italy, Romania, Saudi Arabia, the UAE, the Gulf, China, Malaysia, Singapore and Indonesia.

Can UK and European customers deal with someone locally?

Yes. Our London office is the point of contact for UK and European buyers: +44 20 3129 9169.

Do I need to provide a pattern?

No. We can make the pattern from your drawing. If you already have a pattern, tell us its material and condition.

Question not answered?

Ask our team directly. We reply from Ahmedabad, London or New Jersey.