Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

Projects & parts

Parts we have made

A selection of castings and machined components from our foundry, investment casting unit and machine shop, grouped by type and by customer.

01

Pressure-retaining parts

Our facility is set up for pressure-retaining parts: API 6A-calibrated heat-treatment furnaces with an agitated water-quench tank, tensile testing with extensometer, optical Brinell hardness testing, shot blasting, sand testing and computerised dot marking.

Rows of machined steel flanged and cylindrical parts laid out on cardboard
Machined pressure-retaining parts ready for dispatch
Machined steel flanges and square-flanged blocks laid out on cardboard
Machined flanges and square-flanged blocks

02

Valves & housings

Valve parts and machined housings, supplied ready to assemble. Larger machining is done in our network of vendor machine shops.

Machine shop in our vendor network, with vertical turret lathes and boring machines under an overhead crane
Vendor machine shop where a 16-inch, 300-class ball valve in ASTM CA15 was machined for us
Large machined steel valve ball with a shaft through its centre, mounted between machine chucks
Machined valve ball
Green-painted machined box housing with a flanged top, drilled holes and two machined round faces on the inner wall
Machined and painted housing
Top view into a green-painted machined box housing with drilled holes and two side bores
Machined housing, seen from above

03

Handwheels

Cast handwheels and hand levers for valve operation.

Stacks of cast five-spoke handwheels with square centre holes
Five-spoke cast handwheels
Cast triangular hand lever with a star-shaped socket at its centre
Cast hand lever with star socket
Cast triangular hand lever with a star-shaped socket and a threaded stem
Cast hand lever with threaded stem

04

Machined components

Castings finish-machined in our CNC shop or by our machining partners, to customer drawings.

Six pump impeller castings with machined faces laid out in two rows
Pump impellers with machined faces
Machined steel sleeve with rows of drilled holes, lying on bubble wrap
Machined sleeve with drilled ports
Machined steel cylinder with a large bore and a band of drilled holes, standing on bubble wrap
Machined cylinder with a band of drilled holes
Machined spoked wheel with a central hub on a light-coloured surface
Machined spoked wheel
Large machined steel ring clamped on a machine table under a holding bar
Large ring on the machine table

05

Investment castings

Machined investment-cast components from our Unit II, which makes lost-wax castings from 10 g to 50 kg.

Glowing hot investment casting shell moulds standing in sand on a table
Fired ceramic shells at our investment casting unit
Rows of small polished investment-cast components laid out on a white surface
Small machined investment-cast components
Polished investment-cast components with mirror-finish curved faces on bubble wrap
Investment-cast parts with polished curved faces
Polished dome-shaped investment-cast component with a splined bore at its base
Polished investment-cast dome with splined bore
Polished investment-cast component with a curved mirror-finish face and a splined bore
Polished investment-cast part with splined bore
Polished investment-cast component with a circular face and a mounting lug
Investment-cast part with mounting lug
Range of investment-cast 2-piece ball valve bodies and end pieces
Investment-cast 2-piece ball valve bodies and end pieces
Investment-cast ball valve bodies with four-bolt flanges
Investment-cast ball valve bodies with four-bolt flanges

06

Nickel-alloy parts

Castings in nickel-base alloys including Inconel 625 (ASTM A494 CW6MC), Monel (A494 M35-1) and Incoloy 825 (Alloy 825, A494 CU5MCuC).

Five tee-shaped Incoloy 825 (Alloy 825, ASTM A494 CU5MCuC) castings with machined stems
Incoloy 825 (Alloy 825, ASTM A494 CU5MCuC) castings with machined stems
Tee-shaped Incoloy 825 (Alloy 825, ASTM A494 CU5MCuC) casting with a long machined shaft
Incoloy 825 (Alloy 825, ASTM A494 CU5MCuC) casting with machined shaft
Oval two-hole flange casting with a machined central bore
Nickel-base alloy oval flange casting
Box of oval two-hole flange castings packed in rows
Nickel-base alloy flange castings, packed
Three machined flanges with raised necks on a steel floor
Machined nickel-base alloy flanges
Machined flange with a raised neck and a ring of bolt holes
Machined nickel-base alloy flange

07

Coated parts

Parts supplied with special coatings, such as corrosion-resistant and autophoretic finishes.

Green-coated flanged cylindrical parts of several sizes and a coated square block on a workbench
Coated flanged parts in several sizes
Green-coated round parts of several sizes laid out in two rows beside a coated square block
Coated round parts in several sizes
Two columns of green-coated round parts of several sizes viewed from above
Coated parts, seen from above

08

Exported parts

We have exported castings since 2006, to customers in North America, Europe, the Middle East and Asia.

Rows of dark steel castings with cross-shaped openings grouped closely together
Castings ready for export

09

Cameron (SLB)

Parts for Cameron, USA (now part of SLB), our customer since 2006: a split downstop J407, coated downstops and machined box housings.

Coated split downstop J407 for Cameron
Coated split downstop J407
Detail of a coated split downstop J407 for Cameron
Split downstop J407, detail of the machined slot
Green-coated downstop castings for Cameron in several sizes
Green-coated downstops in several sizes
Machined box housing for Cameron, before coating
Machined box housing, before coating

10

Groth

A 4-inch base cast in CF8M stainless steel and machined on both flanges.

Machined CF8M stainless steel 4-inch base casting for Groth
Machined CF8M base, side view
Machined CF8M stainless steel base casting for Groth, end view
Machined CF8M base, end view

11

Fives

Burner noses cast in FG260 grey iron and machined to drawing.

Machined burner nose cast in FG260 grey iron for Fives
Machined burner nose in FG260 grey iron
Burner nose cast in FG260 grey iron for Fives, seen from above
Burner nose, seen from above

12

World Valve

2-inch butterfly valve bodies cast in SG iron, made in batches.

2-inch SG iron butterfly valve body castings for World Valve
2-inch SG iron butterfly valve bodies

13

VSI

Valve plugs, cages and stems machined from bar and castings, and CF8 stainless castings machined and marked with pressure class and heat number.

Machined and polished valve plugs for VSI
Machined and polished valve plugs
Batch of machined valve plugs for VSI
A batch of machined valve plugs
Machined stainless steel cages for VSI
Machined stainless steel cages
Machined valve stems for VSI
Machined valve stems
Machined CF8 stainless steel casting for VSI, marked with pressure class and heat number
Machined CF8 casting marked CL-900/1500 with its heat number

14

Kemtron

Forged rings and flanges, and castings with critical machined faces, finished to Kemtron's drawings.

Batch of machined castings for Kemtron
A batch of machined castings
Machined forged steel ring for Kemtron
Machined forged ring
Machined forged rings and flanges for Kemtron
Machined forged rings and flanges

15

JVS

Wedges machined in 410 stainless steel.

Machined 410 stainless steel wedge for JVS
Machined 410 stainless steel wedge

16

Super duplex impellers

Pump impellers cast in ASTM A890 grade 6A super duplex stainless steel.

Six pump impellers cast in ASTM A890 grade 6A super duplex
Six grade 6A super duplex impellers
Four super duplex pump impellers, ASTM A890 grade 6A
Grade 6A impellers, vane side

Photos are from our 2021 company presentation and our own photos of parts made between 2016 and 2026. Parts are made to our customers' drawings.

Have a part like these?

Send the drawing, grade and quantity and we will quote.