Reference
Casting standards & grades
A quick reference to the cast grades buyers most often specify, with approximate equivalents across ASTM, EN and wrought designations.
How to read cast-steel designations
ASTM cast stainless and heat-resistant grades follow the Alloy Casting Institute system. The first letter shows the service: C for corrosion-resistant, H for heat-resistant. The second letter indicates the approximate nickel-chromium balance (moving up the alphabet as nickel increases). The number is the maximum carbon in hundredths of a percent, and any trailing letters show extra elements, such as M for molybdenum or N for nitrogen. So CF8M = corrosion-resistant, ~19Cr-10Ni type, 0.08% C max, with molybdenum.
EN grades are given by name (for example GX5CrNiMo19-11-2) and by material number (1.4408). IS grades (for example IS 1030 230-450W) give minimum tensile and yield strengths, with W marking a weldable variant.
We cast to ASTM, DIN, EN, BS, IS and proprietary specifications, up to 180 kg per piece.
Carbon steel
General-purpose and pressure-service grades.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| WCB | ASTM A216 | EN 10213 GP240GH (1.0619) | Valve bodies, flanges, fittings |
| WCC | ASTM A216 | EN 10213 GP280GH (1.0625) | Higher-strength pressure parts |
| LCB / LCC | ASTM A352 | EN 10213 G20Mn5 (1.6220) | Low-temperature pressure parts |
| 65-35 / 70-36 | ASTM A27 | IS 1030 230-450 / 280-520 | General engineering castings |
| 230-450W / 280-520W | IS 1030 | ASTM A27 (approx.) | Weldable general castings |
Alloy steel
Chrome-moly grades for high-temperature pressure service, plus heat-treatable structural grades.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| WC6 | ASTM A217 | EN 10213 G17CrMo5-5 (1.7357) | High-temperature steam valves |
| WC9 | ASTM A217 | EN 10213 G17CrMo9-10 (1.7379) | Higher-temperature pressure parts |
| C5 | ASTM A217 | 5Cr-0.5Mo | Refinery service |
| C12 | ASTM A217 | 9Cr-1Mo | Elevated temperature, sulphur-bearing media |
| SC4130 / SC4140 | ASTM A958 | AISI 4130 / 4140 (cast) | High-strength machine parts |
| Grade 4, Class A–D | ASTM A487 | Ni-Cr-Mo low alloy | Higher-strength pressure parts |
Heat-resistant steel (HRCS)
For service above roughly 650 °C.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| HF | ASTM A297 | 19Cr-9Ni | Moderate-temperature furnace parts |
| HH | ASTM A297 | EN 10295 GX40CrNiSi25-12 (1.4837) | Furnace fixtures, grates |
| HK | ASTM A297 | EN 10295 GX40CrNiSi25-20 (1.4848) | Radiant and higher-strength furnace parts |
| HT | ASTM A297 | 35Ni-15Cr | Thermal-cycling fixtures |
| HP | ASTM A297 | 35Ni-25Cr | Petrochemical high-temperature service |
Stainless steel
Austenitic and martensitic corrosion-resistant grades. ASTM A743 covers general corrosion-resistant service; ASTM A744 covers the same grade family for severe service.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| CF8 | ASTM A351 / A743 | 304 · EN 1.4308 | Valves, pumps, general corrosion |
| CF8M | ASTM A351 / A743 | 316 · EN 1.4408 | Chlorides, chemical media |
| CF3 / CF3M | ASTM A351 | 304L / 316L · EN 1.4309 / 1.4409 | Welded assemblies |
| CN7M | ASTM A351 / A743 | Alloy 20 type | Sulphuric acid service |
| CA15 | ASTM A217 / A743 | 410 | Valve trim, mild corrosion and wear |
| CA6NM | ASTM A743 / A487 | 13Cr-4Ni · EN 1.4317 | Impellers, pump casings, turbines |
Duplex & super duplex
A890 covers general service; A995 covers pressure-containing parts.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| 1B (CD4MCuN) | ASTM A890 / A995 | 25Cr duplex + Cu | Slurry and abrasive-corrosive pumps |
| 4A (CD3MN) | ASTM A890 / A995 | 2205 type · EN 1.4470 | Valves, pumps, chemical process |
| 5A (CE3MN) | ASTM A890 / A995 | 2507 type · EN 1.4469 | Seawater, offshore, desalination |
| 6A (CD3MWCuN) | ASTM A890 / A995 | 25Cr super duplex + W, Cu | Seawater and firewater systems |
Nickel-base alloys
ASTM A494 cast nickel alloys and their wrought counterparts.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| CZ-100 | ASTM A494 | Nickel 200 | Caustic alkalis |
| M35-1 | ASTM A494 | Alloy 400 (Ni-Cu) | Seawater, hydrofluoric acid |
| CY-40 | ASTM A494 | Alloy 600 (Ni-Cr-Fe) | High-temperature, caustic service |
| CW-6MC | ASTM A494 | Alloy 625 | Severe chloride and acid service |
| CW-12MW / CW-2M | ASTM A494 | C-276 / C-4 type | Mixed acids, wet chlorine |
| N-12MV / N-7M | ASTM A494 | B / B-2 type | Hydrochloric acid |
| CU5MCuC | ASTM A494 | Alloy 825 (Incoloy type) | Sulphuric and phosphoric acids |
High-chrome & Ni-hard iron
Abrasion-resistant white irons to ASTM A532.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| Class I Type A, B, C | ASTM A532 | Ni-Cr (Ni-hard) | Wear parts in dry abrasion |
| Class I Type D | ASTM A532 | Ni-Cr, higher chromium | Slurry pump parts, liners |
| Class II Type A, D | ASTM A532 | Cr-Mo (high-chrome) | Slurry pump parts, mill and chute liners |
Manganese steel
Austenitic manganese (Hadfield) steel; work-hardens under impact.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| Grade A, B, C, D | ASTM A128 | Hadfield-type, ~11%+ Mn | Teeth, liners, wear parts under impact |
Grey & SG iron
Cast irons for housings, bodies and machine parts.
| Grade | Standard | Approx. equivalent | Typical use |
|---|---|---|---|
| Various classes, e.g. Class 30 | ASTM A48 | Grey (flake graphite) iron | Housings, machine bases |
| Various grades, e.g. 65-45-12 | ASTM A536 | SG / ductile iron | Valve and pump bodies, housings |
Equivalents are approximate and given for orientation only. Chemistry and property limits differ between standards. Always specify the exact grade and standard on your drawing, and ask us to confirm we can cast it at your part's size and section thickness.
Have a grade on your drawing?
Send it with your enquiry and we will confirm feasibility.
