UK & Europe · PED certified
Steel castings for UK and European buyers
In short
H.J. MetalCraft is a steel foundry in India certified by TÜV NORD as a material manufacturer under the Pressure Equipment Directive 2014/68/EU, with a UK office in London. We supply UK and European engineers with carbon, alloy, stainless, duplex and nickel-alloy castings up to 180 kg, to EN, BS, DIN and ASTM standards, and have exported since 2006.

PED certified for European pressure equipment
TÜV NORD Systems, Notified Body 0045, has certified our quality management system for material manufacturers under the Pressure Equipment Directive 2014/68/EU, Annex I, point 4.3 (certificate 0045/202/WZ/22270/24, valid until August 2027). It covers ferritic, alloyed, austenitic and duplex steel sand castings up to 180 kg and 65 mm thick. For valve, pump and pressure-equipment makers, our material certificates can go straight into the PED technical file. Read what PED certification means for casting buyers.
A local contact, a specialist foundry
Many UK and European engineering firms source castings from India. What they worry about is distance: unclear communication, specification mix-ups and slow answers. Our London office gives you a UK point of contact, in your time zone, for enquiries, drawings and follow-up, while the castings are made in our own foundry in Ahmedabad.
Made to the standards you specify
We hold a PED 2014/68/EU material-manufacturer certificate from TÜV NORD (Notified Body 0045) and an ISO 9001:2015 certificate from TÜV India, so castings for European pressure equipment come with recognised material certification. See certifications. We cast to EN, BS and DIN specifications as well as ASTM and IS. Common European designations include EN 10213 pressure grades such as GP240GH (1.0619), G17CrMo5-5 (1.7357), GX5CrNi19-10 (1.4308) and GX5CrNiMo19-11-2 (1.4408), and EN 10295 heat-resistant grades. See our standards & grades guide.
What we supply
- Valve and pump castings
- API pressure-retaining castings
- Hammer nuts, couplings and impellers
- Coated castings
- Custom castings to drawing for general engineering
Experience exporting
We have shipped castings overseas since 2006, to customers in Ireland, the Netherlands, Denmark, France, Italy, Romania, the USA, Canada, Mexico, Saudi Arabia, the UAE, the Gulf, China, Malaysia, Singapore and Indonesia.
Quality you can check
Chemistry by PMT and CCD spectrometer, tensile and proof-stress testing on a 200 kN machine, Brinell hardness, dimensional inspection and NDT (UT, RT, MT, PT) by Level II engineers with an ASNT-certified Level III. Our process is open to customer evaluations and assessments. See quality control.
Frequently asked questions
Do you have an office in the UK?
Yes. Our UK office is at Spaces, 35 New Broad St, London EC2M 1NH, telephone +44 20 3129 9169.
Can you cast to EN and BS standards?
Yes. We cast to EN, BS and DIN as well as ASTM, IS and proprietary specifications.
Do you export to Europe?
Yes. We have exported since 2006, including to customers in Ireland and the Netherlands.
Where are the castings made?
In our own foundry at Vatva, Ahmedabad, Gujarat, India, which has pattern, moulding, melting, fettling, heat-treatment and machine shops and a quality-control laboratory.
Talk to our London office
Call +44 20 3129 9169 or send your drawing for a quotation.
