Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

Product guide

Valve and pump castings

In short

H.J. MetalCraft is a valve and pump casting manufacturer in Ahmedabad, India. We cast components up to 180 kg (butterfly, high-pressure gate and ball valve bodies, strainers, handwheels, pump casings and impellers) in carbon, alloy, stainless and duplex steel, supplied raw or machined ready to assemble.

2-inch SG iron butterfly valve body castings for World Valve

Valve and pump components we make

Machined components we regularly list include:

  • Butterfly valves: bodies and discs
  • High-pressure gate valves: bodies and bonnets
  • Ball valves: bodies and end pieces
  • Strainers
  • Handwheels
  • Pump components: casings, covers and impellers

Material by service

Service Typical cast grade
Water, oil, gas at moderate temperature ASTM A216 WCB
Low-temperature service ASTM A352 LCB / LCC
High-temperature steam ASTM A217 WC6 / WC9
Corrosive media ASTM A351 CF8 / CF8M
Impellers and hydraulic parts ASTM A743 CA6NM
Seawater and chlorides ASTM A890 / A995 4A, 5A

Why pressure parts need a careful foundry

A valve body must be sound through every wall: porosity or shrinkage that reaches a sealing face or a pressure boundary will leak in test or in service. We control this with method design from our own pattern shop, CO2 and airset moulds with exothermic sleeves and chills to feed thick sections, and radiographic and ultrasonic testing to confirm soundness. Finished parts can be pressure tested on our pressure testing pump.

Machined and ready to assemble

We machine valve and pump parts in-house on CNC VMC and turning centres, and through our vendors, and supply them painted or coated if required.

Frequently asked questions

Which material is used for cast steel valve bodies?

ASTM A216 WCB carbon steel is the most common. A352 LCB is used for low temperatures, A217 WC6 / WC9 for high-temperature steam, A351 CF8M for corrosive media and duplex grades for seawater.

Do you pressure test valve castings?

We have a pressure testing pump in our machine shop, along with UT, RT, MT and PT non-destructive testing.

Can you supply machined valve components?

Yes. Butterfly, high-pressure gate and ball valve parts, strainers and handwheels can be supplied machined, ready to assemble.