Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

Material guide

Carbon steel castings

In short

Carbon steel is the most widely used casting alloy: strong, tough, weldable and economical. H.J. MetalCraft is a carbon steel casting manufacturer in Ahmedabad, India, pouring castings up to 180 kg per piece to ASTM, EN, DIN, BS and IS grades such as ASTM A216 WCB, supplied raw or machined.

Carbon steel valve on a pipeline

What is carbon steel?

Carbon cast steel is iron with roughly 0.1–0.5% carbon plus small amounts of manganese and silicon. Carbon content sets the balance between strength and ductility: lower-carbon grades weld easily and absorb impact, while higher-carbon grades are stronger and harder. Because it needs no expensive alloying elements, carbon steel is the default choice whenever the service medium is not strongly corrosive and temperatures are moderate.

Commonly specified grades

Grade Standard Typical use
WCB ASTM A216 Valve bodies, flanges and fittings for pressure service
WCC ASTM A216 As WCB, with higher strength
LCB / LCC ASTM A352 Pressure parts for low-temperature service
65-35 / 70-36 ASTM A27 General-purpose engineering castings
GP240GH (1.0619) EN 10213 Pressure castings, European specifications
230-450W / 280-520W IS 1030 General engineering, Indian specifications

The grade table is a guide to what buyers usually specify, not a complete list. Send your specification and we will confirm.

Where carbon steel castings are used

  • Valves and pumps: bodies, bonnets, covers, strainers and pump casings for water, steam, oil and gas lines
  • Oil exploration: pressure-retaining components where the medium is not sour or highly corrosive
  • Cement and general engineering: brackets, housings, couplings and machine parts
  • Power generation: pressure parts at moderate temperatures

How we make carbon steel castings

Patterns are built in our own pattern shop in teak wood, aluminium or CI. Moulds and cores are made by the CO2 or airset process, and the steel is melted in a 100 kW induction furnace, with chemistry checked on our spectrometers. Castings are fettled, then normalised, annealed or quenched and tempered in our gas-fired bogie furnaces to reach the required mechanical properties. Every batch can be tensile, hardness and NDT tested before machining or dispatch.

Tips for your enquiry

  1. State the exact grade and standard, for example ASTM A216 WCB.
  2. Mention any impact-test or low-temperature requirement, which may change the grade to A352 LCB/LCC.
  3. List the NDT you need (UT, RT, MT or PT) and the acceptance level.
  4. Say whether you want the casting raw, machined or painted.

Frequently asked questions

What is the difference between ASTM A216 WCB and A352 LCB?

Both are carbon steels for pressure parts. A216 WCB is intended for service at elevated temperatures, while A352 LCB is impact-tested for low-temperature service. Choose LCB when the part must stay tough below about -29 °C.

What size carbon steel castings can you make?

We pour carbon steel castings up to 180 kg per piece with a minimum wall thickness of 7 mm. Send your drawing and we will confirm feasibility.

Can you machine carbon steel castings?

Yes. We machine in-house on CNC VMC and CNC turning centres, and through our vendors, and can supply castings painted or with corrosion-resistant or autophoretic coatings.