Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

Material guide

Stainless steel castings

In short

Stainless steel castings contain at least about 11% chromium, which forms a self-healing oxide film that resists corrosion. H.J. MetalCraft is a stainless steel casting manufacturer in India, casting austenitic grades such as CF8M (the cast equivalent of 316) and martensitic grades such as CA6NM up to 180 kg, for valves, pumps and chemical-process parts.

Machined CF8 stainless steel casting for VSI, marked with pressure class and heat number

What is cast stainless steel?

Cast stainless steels are named differently from wrought grades. In ASTM designations, the first letter tells you the service: C for corrosion-resistant, H for heat-resistant. The second letter indicates the nickel-chromium balance, the number gives maximum carbon in hundredths of a percent, and trailing letters show other elements: M for molybdenum. So CF8M is a corrosion-resistant grade with 0.08% max carbon and molybdenum, the cast equivalent of 316.

Commonly specified grades

Grade Standard Wrought equivalent Typical use
CF8 ASTM A351 / A743 304 (1.4308) Valves, pumps, general corrosion service
CF8M ASTM A351 / A743 316 (1.4408) Chloride-bearing and chemical media
CF3 / CF3M ASTM A351 304L / 316L Welded assemblies, low-carbon needs
CN7M ASTM A351 / A743 Alloy 20 type Sulphuric acid and aggressive chemicals
CA15 ASTM A217 / A743 410 Wear and mild corrosion, valve trim
CA6NM ASTM A743 / A487 13Cr-4Ni Impellers, pump casings, hydro turbines

ASTM A743 covers these grades for general corrosion-resistant service, and ASTM A744 covers the same family of grades for severe service, with additional requirements. We cast to A351, A743 and A744 as well as EN 10213. Tell us which standard your drawing calls for.

Where stainless castings are used

  • Chemical processing: pump casings, impellers, valve bodies, strainers
  • Oil exploration and offshore: corrosion-resistant trim and process parts
  • Valves and pumps: butterfly, gate and ball valve bodies and discs
  • Power generation: water and condensate handling

Making corrosion-resistant castings

Austenitic stainless castings are usually solution-annealed and water-quenched to dissolve carbides and restore corrosion resistance. Our 1.0 t gas-fired bogie furnace and 14,000-litre agitated quench tank are set up for exactly this. Chemistry is confirmed on our CCD spectrometer, and surface quality checked by dye penetrant (PT) testing.

Tips for your enquiry

  1. Give the grade and standard, for example ASTM A351 CF8M.
  2. Tell us the medium, concentration and temperature if you want a grade recommendation.
  3. Specify any intergranular corrosion test, ferrite range or surface finish requirement.

Frequently asked questions

What is the difference between CF8 and CF8M?

CF8 is the cast equivalent of 304 stainless. CF8M adds about 2–3% molybdenum, the cast equivalent of 316, which improves resistance to pitting in chloride-bearing media.

Why are stainless steel castings solution-annealed?

Solution annealing followed by a rapid water quench dissolves chromium carbides formed during cooling, restoring full corrosion resistance and ductility.

Can you supply machined stainless steel castings?

Yes. We machine in-house and through our vendors, and supply machined valve and pump components ready to assemble.