Industry
Castings for chemical processing
In short
Chemical plants need castings that survive acids, alkalis and chlorides without pitting, cracking or contaminating the product. H.J. MetalCraft casts pump, valve and strainer components in stainless steel, duplex and nickel-base alloys up to 180 kg, with spectrometer-verified chemistry.

Corrosion is the design driver
In chemical service, material choice matters more than anything else. The wrong alloy can pit, crack or dissolve within months; the right one runs for years. That is why chemical-plant buyers specify exact grades, and why the foundry must hit that chemistry precisely.
Castings we supply
- Pump casings, impellers and covers
- Valve bodies and discs for butterfly, gate and ball valves
- Strainers and fittings
- Corrosion-resistant coated components for less aggressive service
Matching the alloy to the medium
| Medium | Commonly used cast alloys |
|---|---|
| Mildly corrosive water and organics | CF8 / CF8M stainless |
| Chlorides, brines, seawater | Duplex 4A, super duplex 5A / 6A |
| Sulphuric acid | CN7M (Alloy 20 type) |
| Hydrochloric acid | Nickel-molybdenum (N-12MV / N-7M) |
| Mixed acids, wet chlorine | Ni-Cr-Mo (CW-12MW, CW-6MC) |
This table is a starting point, not a design guide. Final selection should follow your process engineer's specification.
Why chemistry control matters
A few tenths of a percent of molybdenum or nitrogen can change pitting resistance. Our CCD spectrometer analyses 32 elements in ferrous alloys and 24 in nickel-base alloys, including nitrogen, so the alloy you specify is the alloy you receive.
Frequently asked questions
Which stainless steel casting grade is best for chemical pumps?
CF8M (cast 316) is the most common general-purpose choice. For chlorides or higher strength, duplex grades such as A890 4A are used; for strong acids, nickel-base alloys may be needed. The right grade depends on the medium, concentration and temperature.
Can you cast nickel alloys for chemical plants?
Yes. We cast nickel-base alloys to ASTM A494 and proprietary specifications, with chemistry verified on our CCD spectrometer.
Do you supply machined pump and valve components?
Yes. We machine in-house and through our vendors, and supply machined valve and pump components ready to assemble.
