Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

Product guide

CNC machined components

In short

H.J. MetalCraft is a CNC machined components manufacturer in Ahmedabad, India. We machine parts to drawing in our own CNC shop and supply them ready to assemble: our sand and investment castings, and also forged and bar-stock parts. Larger work goes to our vendor machine shops.

Batch of machined castings for Kemtron

What we machine

  • Our own castings: valve and pump bodies, housings, impellers, flanges and burner parts, in carbon, alloy, stainless and duplex steel, nickel-base alloys and cast iron
  • Investment castings from our Unit II, where a near-final shape means less metal to remove
  • Forged and bar-stock parts: rings, stems, plugs and cages, including wrought steels such as EN8, EN9, EN24 and EN36

We work to your drawing, tolerances and surface finish, and can pressure test, mark, paint or coat the finished part.

Our machine shop

Four vertical machining centres, two of them with a 4th axis, and three CNC turning centres sit next to seven conventional lathes and our drilling machines, so a casting can go from the foundry to the machine without leaving the works. Parts beyond the size of our machines, such as large valve bodies, are machined in vendor machine shops.

CNC turning centre in our machine shop with a batch of machined parts

Two vertical machining centres with a 4th axis in our machine shop

Recent machined parts

Kemtron: rings and critical machined castings

Forged rings and flanges, and batches of castings with critical machined faces, finished to Kemtron's drawings.

Batch of machined castings for Kemtron

Machined forged steel ring for Kemtron

VSI: valve plugs, cages, stems and CF8 parts

Valve plugs machined and polished on their sealing faces, cages and stems turned from bar, and CF8 stainless castings machined and marked with pressure class and heat number.

Machined and polished valve plugs for VSI

Machined stainless steel cages for VSI

Machined valve stems for VSI

Machined CF8 stainless steel casting for VSI, marked with pressure class and heat number

Groth: CF8M base

A 4-inch base cast in CF8M stainless steel and machined on both flanges.

Machined CF8M stainless steel 4-inch base casting for Groth

JVS: 410 stainless wedges

Machined 410 stainless steel wedge for JVS

More parts are on our projects page.

Frequently asked questions

Do you only machine castings you have made?

No. Most of our machining is on our own sand and investment castings, but we also machine forged and bar-stock parts to drawing, such as rings, stems, plugs and cages.

How large a part can you machine?

In our own shop, turning up to Ø600 × 1,050 mm and milling on a VMC up to 1,300 × 700 × 700 mm. Larger parts are machined in vendor machine shops.

Can you pressure test and mark machined parts?

Yes. We pressure test hydrostatically or pneumatically, and mark parts by laser or computerised dot marking with part number, heat number or pressure class.