Material guide
Heat-resistant steel castings (HRCS)
In short
Heat-resistant cast steels (HRCS) are high chromium-nickel alloys that keep their strength and resist oxidation and scaling at temperatures where ordinary steel fails. H.J. MetalCraft manufactures heat-resistant steel castings in Ahmedabad, Gujarat, up to 180 kg, to grades such as ASTM A297 HH and HK for furnace, kiln and high-temperature duty.

What is heat-resistant cast steel?
Heat-resistant steels are cast alloys designed for continuous or cyclic service at high temperature, typically above 650 °C. Chromium forms a protective oxide scale; nickel adds strength, toughness and resistance to thermal cycling and carburisation. The H-series grades of ASTM A297 are the most widely specified, ranging from 19Cr-9Ni (HF) up to 35Ni-25Cr (HP).
Commonly specified grades
| Grade | Standard | Nominal composition | Typical use |
|---|---|---|---|
| HF | ASTM A297 | 19Cr-9Ni | Moderate-temperature furnace parts |
| HH | ASTM A297 | 25Cr-12Ni | Furnace fixtures, grates, burner parts |
| HK | ASTM A297 | 25Cr-20Ni | Higher-strength furnace and radiant parts |
| HT | ASTM A297 | 35Ni-15Cr | Heat-treatment fixtures under thermal cycling |
| HP | ASTM A297 | 35Ni-25Cr | Petrochemical and severe high-temperature duty |
| GX40CrNiSi25-20 (1.4848) | EN 10295 | 25Cr-20Ni | European equivalent of HK |
Where heat-resistant castings are used
- Cement: kiln and cooler parts exposed to hot clinker and gases
- Heat-treatment and furnace builders: trays, baskets, rails, rollers and fixtures
- Power generation and boilers: burner nozzles, supports and hangers
- Chemical and petrochemical: parts in reformers and high-temperature process equipment
Making HRCS well
High-alloy heats need tight chemistry control: our CCD spectrometer analyses 32 elements in ferrous alloys, so chromium, nickel, carbon and silicon are confirmed before pouring. CO2 and airset moulds give the dimensional stability these alloys need, and dedicated fettling with oxygen gas cutting and 600 A welding finishes the castings.
Tips for your enquiry
- Give the maximum operating temperature and atmosphere (oxidising, carburising, sulphur-bearing).
- Say whether the part sees thermal cycling or a steady temperature.
- Specify the grade if known, or let us suggest one from the service conditions.
Frequently asked questions
What does HRCS stand for?
HRCS stands for heat-resistant cast steel: chromium-nickel steel castings designed to keep their strength and resist scaling at high temperatures.
What is the difference between HH and HK grades?
Both are ASTM A297 grades. HH is about 25% chromium and 12% nickel; HK raises nickel to about 20%, giving better high-temperature strength and stability, so it is preferred for more demanding furnace service.
Do you cast heat-resistant parts for cement plants?
Cement is one of the industries our castings serve. Send your drawing and service temperature and we will confirm the grade and feasibility.
