Material guide
High-chrome & Ni-hard iron castings
In short
High-chrome and Ni-hard irons are abrasion-resistant white irons, used where parts are worn away by sand, slurry, ore or clinker rather than broken by impact. H.J. MetalCraft manufactures high-chrome and Ni-hard castings in India to ASTM A532 Class I (Ni-Cr) and Class II (Cr-Mo) grades, to customer drawings.

What are Ni-hard and high-chrome irons?
Both are white cast irons: the carbon is held as very hard carbides instead of graphite. Those carbides resist abrasion far better than steel, at the cost of ductility, so these irons suit parts that are worn away rather than parts that take heavy shock.
ASTM A532 groups them into classes:
- Class I, nickel-chromium irons, known as Ni-hard. Nickel lets the matrix harden on cooling; Type D adds more chromium.
- Class II, chromium-molybdenum irons, known as high-chrome irons, with higher chromium for a tougher carbide structure and better resistance to wear combined with some corrosion.
Grades we cast
| Class | Type | Family | Typical use |
|---|---|---|---|
| I | A, B, C | Ni-Cr (Ni-hard) | Wear parts in dry abrasion: liners, grinding parts |
| I | D | Ni-Cr, higher chromium | Pump parts and liners in slurry service |
| II | A, D | Cr-Mo (high-chrome) | Slurry pump parts, mill and chute liners |
The typical uses are a general guide. Hardness, chemistry and heat-treatment limits vary by class and type: send your drawing and grade, and ask us to confirm the grade before ordering.
Where they are used
- Cement: parts in contact with raw meal and clinker
- Earth-moving and mining: liners and wear parts handling ore, sand and rock
- Pumps: casings, impellers and liners for abrasive slurries
Working with abrasion-resistant irons
These irons are very hard, so they are designed to need little machining: functional faces are usually ground, and holes and fixing points are kept simple or cast in. Chemistry is checked on our spectrometer and hardness on our computerised Brinell tester. Heat treatment, where the grade calls for it, is done in our own furnaces.
Tips for your enquiry
- Give the ASTM A532 class and type, or the hardness and wear duty you need.
- Describe what wears the part: dry abrasion, slurry, or abrasion with impact.
- Mark the faces that must be ground or machined.
Frequently asked questions
What is the difference between Ni-hard and high-chrome iron?
Both are abrasion-resistant white irons to ASTM A532. Ni-hard (Class I) is a nickel-chromium iron; high-chrome (Class II) is a chromium-molybdenum iron with more chromium, which gives a tougher carbide structure and some corrosion resistance as well as wear resistance.
Which ASTM A532 grades do you cast?
Class I Types A, B, C and D, and Class II Types A and D, to customer drawings. Send your grade and we will confirm it for your part.
Can high-chrome iron castings be machined?
Only to a limited extent, because the iron is very hard. Functional faces are usually ground, so parts are designed to need little machining.
