Skip to content
H. J. MetalCraft logo H.J. MetalCraft The foundry experts

Industry

Castings for earth-moving & mining

In short

Earth-moving and mining machines wear their parts out through impact and abrasion. H.J. MetalCraft casts wear and structural parts for this equipment in manganese steel, high-chrome and Ni-hard irons and alloy steels, up to 180 kg each, and our parent company Patterncraft builds patterns for very large crusher parts.

Excavator at a mining site

Impact, abrasion, or both

The right material depends on how a part wears:

Wear Usual material Guide
Heavy, repeated impact Austenitic manganese steel, ASTM A128 Manganese steel
Abrasion with little impact High-chrome or Ni-hard iron, ASTM A532 High-chrome & Ni-hard
Strength and toughness under load Quenched and tempered alloy steel Alloy steel

What we cast for the sector

We cast parts for earth-moving equipment to customer drawings, up to 180 kg per piece. Typical castings in this sector include teeth and adaptors, liners and wear plates, smaller crusher wear parts, brackets and housings. Send your drawing with the material and hardness you need and we will confirm feasibility.

Large crusher patterns from Patterncraft

Our parent company, Patterncraft Enterprise, has made pattern equipment since 1985 and exported patterns since 2000. Its work for the crushing industry includes some very large tooling:

  • Pitman 120 match plate, 2.5 × 5.0 m, and Pitman 106 front end
  • Jaw plate pattern with special PU colour
  • Mantle, 2.5 m diameter, under machining
  • HP 500 main frame, 12 × 12 ft and 1.5 m high
  • HP 300 main frame, a 4-tonne aluminium pattern

These parts are far heavier than our 180 kg foundry limit: they are cast by other foundries from Patterncraft's patterns. They show the pattern-making capability behind our castings, not castings we pour. See Patterncraft on our About page.

Frequently asked questions

Do you cast crusher jaw plates and mantles?

Not the large ones. Our foundry pours castings up to 180 kg per piece. Our parent company Patterncraft makes patterns for large crusher parts such as jaw plates, mantles and main frames, which other foundries cast.

Which materials do you use for wear parts?

Austenitic manganese steel (ASTM A128) for impact, high-chrome and Ni-hard irons (ASTM A532) for abrasion, and quenched and tempered alloy steels for strength under load.

Can you make the pattern for my wear part?

Yes. Patterns are made in our own pattern shop, run by Patterncraft Enterprise, in teak wood, aluminium or CI.